Description
Article No. | : | 1708 XS3 | POLYKNIT MONO ELASTIC | |||||||||
Colour | : | 105 = Natural, 990 = Black | ||||||||||
Weight, approx. | : | approx. 40 g/m2 | ||||||||||
Width | : | approx. 150 cm | ||||||||||
Roll length | : | approx. 120 m | ||||||||||
Composition | : | 100% PES | ||||||||||
Warp | : | PES | ||||||||||
Weft | : | PES textured | ||||||||||
Construction | : | plain fringe | ||||||||||
Coating | : | micro random dot | ||||||||||
Mesh: 21 points/cm2, approx. 76 | ||||||||||||
Care Label | : | |||||||||||
Weft-insert with textured weft for light-weight manufacture in ladies and menswear. | ||||||||||||
Whatever the weight of the outer – be it silk, viscose, cupro, acetate, micro-fibres, | ||||||||||||
velvet or mohair – its characteristics remain unchanged. You obtain a good peel | ||||||||||||
strength as this article is particularly adapted to outer fabrics which are difficult to | ||||||||||||
be fused. Ideal for mono-elastic outers. If double lamination is required please fuse | ||||||||||||
warp to warp / weft to weft. Thus the best possible handle and support will be | ||||||||||||
obtained. Also available as tape. The chest reinforcement should NOT be fused on | ||||||||||||
the bias. Corresponds to TL 8305-0210/5 – interlining light of the German Federal | ||||||||||||
Armed Forces (BWB). | ||||||||||||
Glue-line temperature | Pressure | Fusing time | ||||||||||
Recommended | ||||||||||||
Fusing Conditions | 121 – 132 0 C | 2 – 4 bar | 10 – 16 s | |||||||||
250 – 270 0 F | 200 – 400 p/cm2 | |||||||||||
15 – 30 N/cm2 | ||||||||||||
Results will vary according to the type of fabric used, and the model of the fusing press. | ||||||||||||
For this reason pre-production testing is essential |